LED Program Card (Version 2.0) For Car

$8.40 | MRSP $12.00

This program card is used to set the programmable parameters of brushless ESC, it has a friendly user interface to set the programmable parameters very easily. It is pocket-sized, so you can bring it to the racing or flying field conveniently.

This program card has 3 kinds of front panel to suitable for the following ESCs:

A)  Product Number:  LED_PC2A    
      This is available for PLATINUM series aircraft/heli ESC;

B)  Product Number:  LED_PC2B
      This is available for SEAKING series boat ESC;

C)  Product Number:  LED_PC2C
      This is available for XERUN and EZRUN series (Version 2.0 ) car ESC;
 
The hardware and software of the above 3 models of program cards are identical, so you can print the different front panel when using the program card with different ESC.
 
1  Specification

1.1 Size:  88mm (L) * 58mm (W) * 14mm (H)
1.2 Weight:  40g.
1.3 Input Voltage:  4.8-6V (If the ESC hasn’t a built-in BEC, you must use an additional battery pack to supply the program card)   

2  Programmable Items
 The programmable items of LED_PC2C  (Available for XERUN and EZRUN series car ESC of Version2) 

    #1    Running Mode
    #2    Drag Brake Force
    #3    Low Voltage Cut-Off Threshold
    #4    Start Mode
    #5    Maximum Brake Force
    #6    Maximum Reverse Force
    #7    Initial Brake Force
    #8    Throttle Neutral Range
    #9    Timing
    #10  Over-Heat Protection
    #11    Motor Rotation
    #12    Lipo Cells
 

(Note: The item #11 and #12 are not available for XERUN series ESC of Version 2, they only available for EZRUN series ESC)   

 

Front Panel Picture of LED_PC2C: